Electrician

The Transocean is seeking an Electrician.

Transocean is focused on being the employer of choice for the drilling industry.

We are challenging ourselves every day to push the performance of the company through technological advances and passion for our work.

Job Summary

Assist the Chief Electrician in the installation, maintenance and repair of all electrical equipment onboard the vessel.

Job Description

Reporting: Reports to the Chief Electrician

Supervision: None

Duties and Responsibilities

Operations/Maintenance:

• Perform daily inspections and maintenance on electrical equipment – Authority I.
• Comply with the permit to work and isolation systems – Authority I.
• Carry out periodic maintenance according to the Rig Maintenance System (RMS) guidelines and coordinate that maintenance with supervisor and other department heads – Authority III.
• Maintain, troubleshoot and repair all power generation and distribution equipment, i.e. generators and engine controls, SCRs, switchgears, transformers, etc. – Authority II.
• Assist with the maintenance and repair of general rig equipment such as HVAC system, refrigeration plants, communication systems, lighting, etc. – Authority II.
• Carry out maintenance and repair on electrical components of drilling equipment, i.e. Driller’s console, DC drilling motors and auxiliaries, Top Drive System, drawworks, mud pumps, etc. – Authority III.
• Carry out maintenance and repair on electrical components of marine equipment, i.e. thruster motors and auxiliaries, ballast pumps, control panels, cranes, etc. – Authority III.
• Install new equipment as required, with regards to electrical wiring, fixtures and junction boxes, etc. – Authority II.
• Assist in performing and interpreting power calculations, power factor, insulation tests, and positive relay tests as required – Authority II.
• Study and understand electrical schematics as required – Authority I.
• Maintain an adequate supply of spares to fulfill maintenance requirements; inform Chief Electrician when there is need to reorder. – Authority II.
• Inform supervisor and other department heads of any technical problems or limitations that may affect the safe operation of the rig – Authority I.
• Assist with the implementation of outstanding recommendations from audits, as issued by Clients, Regulatory Authorities or rig management – Authority II.
• Ensure that reports for repair and maintenance of equipment are accurate and complete – Authority I.
• Assist in supplying information for maintenance and repair budget – Authority II.
• Communicate equipment problems or breakdown information via direct supervisor to Field Support Group – Authority II.

QHSE:

• Incorporate the THINK planning process into all tasks, whether working alone or as part of a team – Authority I.
• Participate daily in START Process – Authority I.
• Apply START Monitoring during the execution of planned tasks – Authority I.
• Call a Time Out for Safety (TOFS) whenever an unplanned hazard or a change in the expected results is observed – Authority I.
• Carry out assigned duties in a safe manner according to Company policies and procedures – Authority I.
• Actively participate in weekly safety meetings and pre-tour meetings as required – Authority I.
• Report any incidents, potential hazards or abnormal situations to supervisor and other department heads – Authority I.
• Respond to emergency situations as per designation on station bill – Authority I.
• Assist in preparing Safety Analysis for hazardous situations – Authority II.
• Ensure that all relevant safety procedures and practices are adhered to during mechanical maintenance work – Authority I.
• Assist in ensuring that a high standard of hygiene and housekeeping is maintained onboard the rig – Authority I.
• Ensure compliance with regulatory requirements for environmental protection – Authority I.

Personnel:

• Meet the training requirements of the applicable training matrix – Authority I.
• Participate fully in the annual performance appraisal process – Authority I.
• Assist with the supervision and training of the Electrical Trainee – Authority II.
• Maintain discipline onboard and ensure compliance with Company disciplinary procedures – Authority II.

Pre Requisites/ Qualifications

• High School Diploma (U.S.)/ Proof of Completion of Formal Education or Relevant Craft Certificate (where applicable).
• Valid medical examination and vaccination certificates.
• Knowledge of all technical calculations required for electrical operation of the drilling unit and basic computer skills.
• Successful Military Discharge – Preferred for U.S.
• Graduate of Trade School or University where knowledge and training acquired are applicable to job requirements – Preferred.

If you want to push yourself to great achievement, let Transocean develop your career.